Pipes, elbows & lines pack

Everything needed to draw the lines of a screen: pipe runs, elbows and tees in every orientation, manifolds, pipe ends, service lines by fluid and flow arrows.

386 symbols · Realistic 171 · ISA-101 215

  • 386 symbols as editable SVG and PNG
  • 20 with state change: one file per state
  • One ZIP with everything, or one by one
  • They use no downloads and open in the Symbol Builder

Every symbol in the pack 386

Previews carry a watermark; the files you download do not.

Pipe, insulation & tracing 67Realistic 55 · ISA-101 12

Insulated and traced pipe Straight pipe spool with flanges Corrugated stainless gas tube (CSST) with yellow jacket Flexible corrugated duct with clamps Double-wall corrugated PE pipe with bell Copper tube coil Ductile iron pipe with bell and spigot Cast iron soil stack with sockets and clamps PVC soil stack with wall clips Rain gutter with downspout and offset Soil stack with 45° Y-branch Borosilicate glass pipe with flanges and liquid Insulated elbow with gored cladding Removable insulation box over flange Pipe with elastomeric foam sleeve Clad insulated pipe (horizontal cutaway) Clad insulated pipe (vertical) Clad insulated pipe (sloped) Pre-insulated district heating pipe Clad insulated tee Jacketed elbow Jacketed pipe with flanges and steam nozzles Vertical jacketed pipe with flanges Jacketed pipe with welded ends and threaded nozzles Pipe with half-pipe coil jacket Threaded hex nipple PE pipe with butt-fusion joint PE pipe with electrofusion coupler PE pipe with blue stripe Section: 3-layer PE coated pipe with cut-back ends Cross-section of double-containment pipe Cross-section of insulated, clad and traced pipe Cross-section of lined and coated pipe Cross-section of PEX-AL-PEX multilayer pipe Section: insulated pipe with tracer and cladding Section: double-containment pipe-in-pipe Section: flanged pipe with PTFE liner Section: steel pipe with rubber lining Longitudinal section: steel pipe with cement-mortar lining Short flanged spool piece Sanitary stainless tube with clamp joint Vertical stainless tube with ferrules Horizontal straight pipe, beveled ends Vertical straight pipe, beveled ends 45° sloped straight pipe, beveled ends Horizontal welded pipe with weld beads Vertical welded pipe with weld beads Sloped welded pipe with weld beads Vertical pipe with flanged ends Sloped pipe with flanged ends Pipe with electric heat tracing and junction box Vertical pipe with electric heat tracing Elbow with steam tracer Pipe with spiral steam tracer Pipe with parallel steam tracer Insulated pipe (horizontal) Insulated pipe (vertical) Jacketed pipe (horizontal) Jacketed pipe (vertical) Straight pipe run, horizontal, medium Straight pipe run, horizontal, short Straight pipe run, vertical, short Straight pipe run, vertical, medium Straight pipe run, horizontal, long Straight pipe run, vertical, long Traced and insulated pipe (horizontal) Traced and insulated pipe (vertical)

Elbows, tees & reducers 126Realistic 76 · ISA-101 50

90° flanged elbow Concentric reducer Eccentric reducer Flanged tee Saddle tap with strap clamps Stub-in branch with reinforcing pad Weldolet branch with threaded outlet Cast iron flanged cross Glued PVC cross Threaded female cross Welded cross Soldered copper 45° elbow Soldered copper 90° elbow Soldered copper reducer Soldered copper return bend Soldered copper tee 90° ductile iron bend, bell and spigot Ductile iron bell tee 180° flanged return bend 180° long-radius welded return bend 180° short-radius welded return bend 180° threaded return bend 45° flanged elbow 45° glued PVC elbow 45° threaded female elbow 45° long-radius welded elbow 45° welded elbow (rising) 90° cast flanged elbow 90° long-radius welded elbow (in left, out down) 90° long-radius welded elbow (in left, out up) 90° mitred welded elbow 90° glued PVC elbow 90° short-radius welded elbow 90° street elbow (male-female) 90° threaded female elbow Glass 90° elbow with flanges Glass tee with flanges 45° flanged lateral 45° welded lateral S-offset with two 45° elbows Z-offset with 90° elbows and flanges PE 90° elbow with electrofusion terminals PE fusion tee Hex reducing bushing Glued PVC reducer Threaded swage reducer Vertical concentric flanged reducer Concentric welded reducer Eccentric welded reducer (flat on bottom) Eccentric welded reducer (flat on top) Concentric welded expander Stainless 45° elbow with ferrules Stainless 90° elbow with ferrules Stainless concentric reducer with ferrules Stainless 180° return bend with ferrules Sanitary stainless tee with ferrules Tee with flanged branch Cast iron flanged tee Flanged reducing tee (branch down) Glued PVC tee Threaded female tee Welded equal tee (branch down) Welded reducing tee Welded equal tee (branch up) Welded Y-branch (wye) Threaded cross fitting 180° return bend, flanged Long-radius 90° butt-weld elbow 90° elbow with cleanout access port Threaded street elbow 45° lateral (wye) fitting Threaded hex reducing bushing Eccentric reducer, flat on top Concentric butt-weld reducer (swage) Reducing butt-weld tee Weldolet branch outlet Bypass loop, right side Bypass loop, over Bypass loop, under Bypass loop, left side Crossing, connected Crossing, connected with dot Crossing, not connected: horizontal broken Crossing, not connected: vertical broken Crossing, not connected: horizontal hops over Crossing, not connected: vertical hops over 45° elbow from left to up-right 45° elbow from left to down-right 45° elbow from right to up-left 45° elbow from right to down-left 45° elbow from up to down-right 45° elbow from up to down-left 45° elbow from down to up-right 45° elbow from down to up-left 90° elbow right-up 90° elbow left-up 90° elbow right-down 90° elbow left-down Rounded 90° elbow right-up Rounded 90° elbow left-up Rounded 90° elbow right-down Rounded 90° elbow left-down 45° lateral branch (horizontal run) to up-right 45° lateral branch (horizontal run) to up-left 45° lateral branch (horizontal run) to down-right 45° lateral branch (horizontal run) to down-left 45° lateral branch (vertical run) to up-right 45° lateral branch (vertical run) to up-left 45° lateral branch (vertical run) to down-right 45° lateral branch (vertical run) to down-left Concentric reducer, narrows right Concentric reducer, narrows down Concentric reducer, narrows left Concentric reducer, narrows up Eccentric reducer, narrows down, flat side right Eccentric reducer, narrows down, flat side left Eccentric reducer, narrows left, flat side bottom Eccentric reducer, narrows left, flat side top Eccentric reducer, narrows right, flat side bottom Eccentric reducer, narrows right, flat side top Eccentric reducer, narrows up, flat side right Eccentric reducer, narrows up, flat side left Tee, branch up Tee, branch down Tee, branch right Tee, branch left

Manifolds & headers 37Realistic 7 · ISA-101 30

Manifold with 4 outlets Two-outlet flanged manifold Three-outlet threaded manifold with plugs Four-outlet manifold with ball valves Five-outlet manifold, outlets alternating up and down Six-outlet double-row manifold Ring main with four take-offs 3-port manifold: inlet and 1 outlets up and 1 down (closed end) 5-port manifold: inlet and 2 outlets up and 2 down (closed end) 7-port manifold: inlet and 3 outlets up and 3 down (closed end) 4-port through header: 1 taps up and 1 down 6-port through header: 2 taps up and 2 down 8-port through header: 3 taps up and 3 down 3-port manifold: inlet and 2 outlets down (closed end) 3-port manifold: inlet and 2 outlets up (closed end) 4-port manifold: inlet and 3 outlets up (closed end) 5-port manifold: inlet and 4 outlets up (closed end) 6-port manifold: inlet and 5 outlets up (closed end) 7-port manifold: inlet and 6 outlets up (closed end) 8-port manifold: inlet and 7 outlets up (closed end) 4-port manifold: inlet and 3 outlets down (closed end) 5-port manifold: inlet and 4 outlets down (closed end) 6-port manifold: inlet and 5 outlets down (closed end) 7-port manifold: inlet and 6 outlets down (closed end) 8-port manifold: inlet and 7 outlets down (closed end) 3-port through header: 1 taps up 4-port through header: 2 taps up 5-port through header: 3 taps up 6-port through header: 4 taps up 7-port through header: 5 taps up 8-port through header: 6 taps up Vertical 4-port manifold: inlet on top and 3 outlets right Vertical 6-port manifold: inlet on top and 5 outlets right Vertical 8-port manifold: inlet on top and 7 outlets right Vertical 4-port manifold: inlet at bottom and 3 outlets left Vertical 6-port manifold: inlet at bottom and 5 outlets left Vertical 8-port manifold: inlet at bottom and 7 outlets left

Plugs, caps, vents & drains 38Realistic 24 · ISA-101 14

Inflatable pipe plug with pressure gauge (section) Threaded pipe cap (female) Breather vent plug with mesh cap Magnetic drain plug with seal washer Hex head pipe plug (tapered NPT thread) Hex socket pipe plug (Allen) Square head pipe plug Mechanical expandable test plug in pipe (section) PVC pipe with bell end and rubber ring Stainless blind cap with gasket and clamp PVC end cap Female threaded pipe cap Butt-weld dished cap Meter chamber with valves and cover Valve chamber with extension spindle and cover Floor cleanout plug (top view) Gully with grating (top view) Bull plug Hex-head pipe plug Socket-head flush plug (face view) Square-head pipe plug Inflatable pipe test plug Bottle trap with cleanout cap Surface valve box with operating key Drain with funnel and air gap Pipe end closed with plate (closes right) Pipe end closed with plate (closes down) Pipe end closed with plate (closes left) Pipe end closed with plate (closes up) Pipe end with dished cap (closes right) Pipe end with dished cap (closes down) Pipe end with dished cap (closes left) Pipe end with dished cap (closes up) Pipe end with threaded plug (closes right) Pipe end with threaded plug (closes down) Pipe end with threaded plug (closes left) Pipe end with threaded plug (closes up) Vent with weather cap

Service & signal lines 80Realistic 9 · ISA-101 71

Acid pipe (orange) Alkali pipe (violet) Compressed air pipe (blue) Fire-fighting pipe (red) with sprinkler Combustible gas pipe (yellow) Oil pipe (brown) Steam pipe (red) Vacuum pipe (grey) Water pipe (green, DIN 2403 colour code) Capillary tube, with cross marks (horizontal) Capillary tube, with cross marks (vertical) Electric signal, elbow right-up Electric signal, elbow left-up Electric signal, elbow right-down Electric signal, elbow left-down Electric signal, short dashes (horizontal) Electric signal, short dashes (vertical) Pneumatic signal, elbow right-up Pneumatic signal, elbow left-up Pneumatic signal, elbow right-down Pneumatic signal, elbow left-down Pneumatic signal, with slash marks (horizontal) Pneumatic signal, with slash marks (vertical) Data / software link, dotted (horizontal) Data / software link, dotted (vertical) Air line (long dashes), connected crossing Air line (long dashes), elbow right-up Air line (long dashes), elbow left-up Air line (long dashes), elbow right-down Air line (long dashes), elbow left-down Air line (long dashes), horizontal run Air line (long dashes), vertical run Air line (long dashes), tee branch up Air line (long dashes), tee branch down Air line (long dashes), tee branch right Air line (long dashes), tee branch left Gas line (dash-dot), connected crossing Gas line (dash-dot), elbow right-up Gas line (dash-dot), elbow left-up Gas line (dash-dot), elbow right-down Gas line (dash-dot), elbow left-down Gas line (dash-dot), horizontal run Gas line (dash-dot), vertical run Gas line (dash-dot), tee branch up Gas line (dash-dot), tee branch down Gas line (dash-dot), tee branch right Gas line (dash-dot), tee branch left Oil line (with cross ticks), connected crossing Oil line (with cross ticks), elbow right-up Oil line (with cross ticks), elbow left-up Oil line (with cross ticks), elbow right-down Oil line (with cross ticks), elbow left-down Oil line (with cross ticks), horizontal run Oil line (with cross ticks), vertical run Oil line (with cross ticks), tee branch up Oil line (with cross ticks), tee branch down Oil line (with cross ticks), tee branch right Oil line (with cross ticks), tee branch left Product line (with beads), connected crossing Product line (with beads), elbow right-up Product line (with beads), elbow left-up Product line (with beads), elbow right-down Product line (with beads), elbow left-down Product line (with beads), horizontal run Product line (with beads), vertical run Product line (with beads), tee branch up Product line (with beads), tee branch down Product line (with beads), tee branch right Product line (with beads), tee branch left Steam line (double line), connected crossing Steam line (double line), elbow right-up Steam line (double line), elbow left-up Steam line (double line), elbow right-down Steam line (double line), elbow left-down Steam line (double line), horizontal run Steam line (double line), vertical run Steam line (double line), tee branch up Steam line (double line), tee branch down Steam line (double line), tee branch right Steam line (double line), tee branch left

Flow arrows & line connectors 38ISA-101 38

Block flow arrow, right Block flow arrow, down Block flow arrow, left Block flow arrow, up Two-way flow arrows (horizontal) Two-way flow arrows (vertical) Chevron flow arrow, right Chevron flow arrow, down Chevron flow arrow, left Chevron flow arrow, up Triple chevron flow arrows, right Triple chevron flow arrows, down Triple chevron flow arrows, left Triple chevron flow arrows, up Pipe with FI and flow direction arrow (horizontal) Pipe with FI and flow direction arrow (vertical) Triangle flow arrow, right Triangle flow arrow, down Triangle flow arrow, left Triangle flow arrow, up Pipe with line tag box (horizontal) Pipe with line tag box (vertical) Two-way off-page connector (horizontal) Two-way off-page connector (vertical) Round off-page connector (right) Round off-page connector (down) Round off-page connector (left) Round off-page connector (up) Off-page connector: flow arrives from right Off-page connector: flow arrives from down Off-page connector: flow arrives from left Off-page connector: flow arrives from up Off-page connector: flow leaves right Off-page connector: flow leaves down Off-page connector: flow leaves left Off-page connector: flow leaves up Instrument / sample tap down Instrument / sample tap up

More about this pack

What is included
  • Clean, editable SVG. 386 symbols: 171 Realistic, 215 ISA-101 flat.
  • State switching. 20 flat symbols switch state (stopped, running, no feedback, manual and disabled): the ZIP has one file per state, ready for a multi-state object.
  • One ZIP with everything. SVG with fixed colours, 512 px PNG with a transparent background, and a CSV index with the names in English and Spanish, sorted by family.
  • No downloads used, and editable. Pack symbols do not count against monthly downloads, on the free account either, and they open in the Symbol Builder so you can modify them.
Which HMI it works with

They are ordinary SVG and PNG files. They import as images into any HMI or SCADA editor that accepts images; if yours does not take SVG, use the PNG. They do not depend on any vendor or proprietary format.

What happens after you pay
  1. You pay on Stripe. Stripe takes the payment with the account you are signed in with here. You get their receipt by email.
  2. You come back to this page. The pack is linked to your account within seconds. There is nothing to do and no code to enter.
  3. Download and edit. Get everything as a ZIP from this page, or open any pack symbol in the library: download it without using your downloads, or open it in the Symbol Builder.
Pack or plan

For comparison: the Starter plan is 19.99 € a month and includes 50 downloads a month of any symbol in the library. The pack is 386 symbols for one kind of equipment that you pay for once.

Licence

You may use the pack symbols in your own projects and in your clients’ projects, commercial ones included. You may not resell or redistribute the files, on their own or inside another library. Terms of service.

Flat symbols use grey for the equipment and keep colour for state. They are not certified against any standard: check them against your company’s graphics standard.