Symbol packs by equipment type

The 6,880 symbols in the library, in 16 one-time packs: they download without using downloads and can be edited.

Valves & actuators

Ball, butterfly, gate, globe, knife, check, control, safety, multi-way and diaphragm valves, with their actuators and dampers.

521 symbols · Realistic 314 · ISA-101 20749 €one-time paymentSee the pack →

Pumps, motors & compressors

Rotating equipment: centrifugal, submersible, positive-displacement, dosing and vacuum pumps, electric motors, gearmotors, drives and transmission, fans, blowers and compressors.

354 symbols · Realistic 242 · ISA-101 11249 €one-time paymentSee the pack →

Tanks & process equipment

Storage and agitated tanks, pressure vessels, silos, hoppers and basins, plus heat exchangers, boilers and furnaces, reactors, columns, dryers, filters, separators, mixers and gas cleaning.

469 symbols · Realistic 211 · ISA-101 25839 €one-time paymentSee the pack →

Pipes, elbows & lines

Everything needed to draw the lines of a screen: pipe runs, elbows and tees in every orientation, manifolds, pipe ends, service lines by fluid and flow arrows.

386 symbols · Realistic 171 · ISA-101 21529 €one-time paymentSee the pack →

Pipe fittings & supports

What goes on the pipe: flanges, couplings and unions, hoses and expansion joints, strainers and steam traps, supports, tank connections, instrument tappings, nozzles and taps.

338 symbols · Realistic 246 · ISA-101 9229 €one-time paymentSee the pack →

Conveyors, lifting & logistics

Moving material: belt, roller, chain and screw conveyors, bucket elevators, feeders, rotary valves and diverters, cranes, hoists and lifts, forklifts, AGVs and lorries, pallets, drums and containers.

592 symbols · Realistic 423 · ISA-101 16939 €one-time paymentSee the pack →

Instrumentation, sensors & lab

Measuring: pressure, temperature, flow, level, analysis, weight and vibration instruments, controllers and tag bubbles, proximity sensors, photocells, limit switches, encoders and vision, and laboratory glassware, analysers and bench equipment.

477 symbols · Realistic 266 · ISA-101 21139 €one-time paymentSee the pack →

Electrical, automation & networks

Inside and around the cabinet: breakers, contactors, pushbuttons, panels, power supplies, batteries and heaters, PLCs and I/O, operator panels, pneumatics and robots, and switches, gateways, antennas, cameras, racks, servers and cables for network diagrams.

396 symbols · Realistic 232 · ISA-101 16439 €one-time paymentSee the pack →

HMI controls & pilot lights

The small pieces of a screen: pushbuttons, switches and selectors, input fields, gauges, bars, displays, trends and faceplates, status lamps and pilot lights in every colour, on and off.

415 symbols · Realistic 273 · ISA-101 14219 €one-time paymentSee the pack →

Alarms, navigation & layout

The structure of a screen: alarm priority shapes and banners, signal quality, modes, interlocks and communication status, plus frames, headers, navigation bars and buttons, tiles, cards, pop-ups, legends and connectors.

339 symbols · Realistic 24 · ISA-101 31515 €one-time paymentSee the pack →

Signalling & safety

Signal towers, beacons, sirens, annunciators and traffic lights, lit and unlit, plus fire protection, detection, emergency stops, machine safety, guards, lockout, PPE, first aid and safety signs.

517 symbols · Realistic 450 · ISA-101 6729 €one-time paymentSee the pack →

Energy, HVAC, lighting & buildings

Site services: solar, turbines, generator sets, batteries, substations and hydrogen, air handling units, chillers, boilers, ducts and grilles, industrial lighting on and off, and doors, docks, stairs and buildings.

585 symbols · Realistic 485 · ISA-101 10039 €one-time paymentSee the pack →

Water, waste & mining

Plant-specific equipment: screens, clarifiers, aeration, membranes, disinfection and sludge treatment; compactors, shredders and sorting lines; crushers, mills, kilns and stockyards; wellheads, separators and pipeline stations.

307 symbols · Realistic 164 · ISA-101 14339 €one-time paymentSee the pack →

Production & packaging machinery

Production machines: metal forming, machine tools, robots, finishing, plastics, paper, glass, textile and wood; pasteurisers, cookers, mixers and hygienic tanks; fillers, labellers, sealers, inspection, palletisers and wrappers.

329 symbols · Realistic 181 · ISA-101 14839 €one-time paymentSee the pack →

P&ID diagram symbols

Line symbols for process diagrams: valves and control valves, pumps, vessels, thermal equipment, solids handling, fittings, line types, instrument bubbles, functions and HVAC.

444 symbols · Schematic 44429 €one-time paymentSee the pack →

Electrical & fluid power diagrams

Line symbols for wiring and single-line diagrams, ladder logic and lighting layouts, and for hydraulic and pneumatic circuits: directional valves, cylinders, pumps, pressure and flow valves and air preparation.

411 symbols · Schematic 41129 €one-time paymentSee the pack →

What a pack is

  • The symbols for one kind of equipmentEach pack gathers one family of equipment: valves, pumps and motors, tanks, piping, instrumentation… The full list is in plain view on the pack page: you know what you are buying.
  • A single paymentYou pay once, with no subscription and no renewal.
  • Downloads without quotaSymbols in a pack you own do not count against monthly downloads, on the free account either.
  • Editing in the Symbol BuilderSymbols in a pack you own open in the Symbol Builder so you can change their shapes, combine them and export them.

Pack or plan

Compare a pack with the Starter and Studio plans

They are two different ways of paying for the same symbols. One does not rule out the other: you can own a pack on any plan, the free account included.

PackStarter planStudio plan
How you pay15 € to 49 € depending on the pack, once19.99 € a month or 120 € a year39.99 € a month or 228 € a year
Which symbolsThe ones in the pack: all those for one kind of equipmentAny of the 6,880 in the libraryAny of the 6,880 in the library
DownloadsNo quota used. One ZIP with the whole pack50 a monthUp to 1,000 a month
Editing in the Symbol BuilderYes, the symbols in the packYes, any symbol (uses one download)Yes, any symbol (uses one download)
RenewalNone: it stays in your accountMonthly or yearly; cancel whenever you likeMonthly or yearly; cancel whenever you like
  • A pack suits you if you need one kind of equipment in depth, want all its symbols at once and would rather not count downloads or keep a subscription.
  • A plan suits you if you need single symbols from many kinds of equipment, or download symbols every month.

A free account keeps its 5 downloads a month of any symbol. What it does not include is opening library symbols in the Symbol Builder to edit them: that comes with a pack or a paid plan. The blank builder is still free.

See the plans and their prices →

Frequently asked questions

Can I use the symbols in client projects?

Yes. You may use them in your own projects and in your clients’ projects, commercial ones included. What you may not do is resell or redistribute the files, on their own or inside another library.

Can I edit the symbols in a pack?

Yes. Symbols in a pack you own open in the Symbol Builder so you can change their shapes, combine them with others and export them, without using downloads. The SVG you download can also be edited in any vector editor.

Does the pack expire?

No. It is a one-time payment: the pack is linked to your account and there is no renewal. You can download it again from its page whenever you need it.

Do I need a subscription to buy it?

No. A free account is enough; that is the account the pack is linked to.

What if I already have a plan?

The pack is separate. Its symbols do not use the plan’s monthly downloads, so those stay free for the rest of the library. If your plan’s downloads already cover the symbols you need, you do not need the pack.

Can a symbol be in two packs?

No. Every symbol in the library is in one pack only; they are split by equipment type. Each symbol page says which pack it belongs to.

Can I see the symbols before buying?

Yes, all of them. Each pack page shows the full list with watermarked previews. The files you download carry no watermark.

Will they work with my HMI?

They are ordinary SVG and PNG files. They import as images into any HMI or SCADA editor that accepts images; if yours does not take SVG, use the PNG. They do not depend on any vendor.

Do you invoice with a VAT number?

Stripe takes the payment. At checkout you can enter your company’s VAT or tax number, and you get the receipt by email. If you need an invoice with other details, write to hello@hmilibrary.com.

Can I return it?

Write to us at hello@hmilibrary.com within 14 days of the purchase.

You may use the pack symbols in your own projects and in your clients’ projects, commercial ones included. You may not resell or redistribute the files, on their own or inside another library.